Important Tips for Maintain Dell Studio 1737 Laptop Battery

Dell Studio 1737  laptop is a terrific 17-inch media center for those non-performance-seekers and value shoppers. A less burdensome graphics subsystem translates to better battery life. Even though this configuration uses a 56Wh battery, it outlasted the dv7 and the dv7 and their bigger 73Wh batteries by a handful of minutes. A bigger 85Wh battery is available through Dell’s Web site only and can easily get you into the 4- to 5-hour range.

Essential Tips for Maintenance of Dell Studio 1737 Laptop Battery

• 1. Laptop Battery for the First Use
  Your new laptop battery comes in a discharged condition and must be charged before use (refer to your computer manual for charging instructions). Upon initial use (or after a prolonged storage period) the battery may require three to four charge/discharge cycles before achieving maximum battery capacity.
• 2. Storage of Laptop Battery
  A charged battery will eventually lose its charge if unused. It may therefore be necessary to recharge the Dell Studio 1737 battery after a storage period.
• 3. Keep the Battery Contacts Clean
  Clean your battery’s metal contacts every couple of months with a cloth moistened with rubbing alcohol. This keeps the transfer of power from your Dell Studio 1537 Battery more efficient.
• 4. Don’t Leave Your Battery in Sunlight
  Batteries are sensitive and exposing them to extreme temperatures can cause major damage. Not only can it completely ruin them but it will also suck the life out of them. Avoid placing your laptop in direct sunlight.

Tips to Maximize Dell Inspiron 630m Laptop Battery Performance

• 1. Purge your battery
  Purging is where you disconnect the AC power completely, and stop the laptop’s sleep or hibernation feature from being initiated. Allow the laptop to discharge the battery until it powers itself off due to lack of power. Reconnect the Dell Inspiron 1720 Power Adapter supply, but do not power the laptop up, and allow the battery to regain a charge for the next 24 hours. If you have NiCad batteries, perform this once a month, and for NiMH every three months.
• 2. Add More RAM
  This will allow you to process more with the memory your laptop has, rather than relying on virtual memory. Virtual memory results in hard drive use, and is much less power efficient. Note that adding more RAM will consume more energy, so this is most applicable if you do need to run memory intensive programs which actually require heavy usage of virtual memory.