AussieBatt High Capacity Toshiba pa3534u-1bas laptop battery – The Extended Life Battery meets or exceeds original manufacturer power specifications for Toshiba pa3534u-1bas Batteries. All our notebook batteries are AU Stock, buy Toshiba pa3534u-1bas battery from us, save your money & time!
Our Advantages: High Quality + Wholesale Price + Fast & Free Shipping
Calibrating the Toshiba pa3534u-1bas laptop battery manually instructions
Manually calibrating the battery requires four steps: fully charge the battery, discharge or drain the battery, recharge the battery, and then run the battery test. This calibrates the battery so the battery gauge accurately displays the level of charge.
NOTE:When possible, use Toshiba System Diagnostics (described above) to test the battery and get calibration steps. The following instructions are for a manual method that work with most battery types.
Step 1: Charge the battery
-
Plug in the power cord.
-
Charge the Toshiba Satellite A200 Battery to a full charge.
-
When the battery is fully charged, proceed.
Step 2: Discharge the battery
-
Disconnect the TOSHIBA Satellite A200 AC Adapter power cord.
-
Shutdown the computer.
-
Press the power button to start the computer.
-
Press the Esc key when the Toshiba logo screen appears. You might have to try this more than once to see the Startup menu. If Windows opens, shut down the computer and start again.
-
Press F2 to select F2 System Diagnostics in the Startup Menu .
-
Click Hard Disk Test .
-
Leave the computer on and allow the Toshiba Satellite A200 Battery to fully discharge while doing the Hard Disk Test.NOTE:You are doing the Hard Disk Test only to drain or discharge the battery, not to get the results of the test. The battery discharges and the computer turns off before the test results display.
Step 3: Recharge the battery
-
Plug in the power cord to charge the battery.
-
Charge the battery to a full charge, 99%-100%.
-
Check the battery charge. Turn on the computer and start Windows normally. Mouse over the battery icon in the system tray.NOTE:The battery continues to charge with the computer on or off.
-
After reaching a full charge, keep the computer attached to the power cord for (at least) 2.5 hours.NOTE: If you plug in your power cord and immediately run the Toshiba Laptop Battery Check, you might get a false failure showing the battery is bad. If the battery is in a low charge state (at less than 3%) you might also get a false reading.
Step 4: Run the battery test
-
Ensure that the power cord is plugged in.
-
Press the power button to start the computer.
-
Press Esc on the keyboard when the Toshiba logo screen appears.
-
Press F2 to select F2 System Diagnostics in the startup menu.
-
Click Battery Test .
-
Click Start Battery Test on the Battery Test page.The Battery Test page shows Test in progress and displays the Estimated Time Remaining.The results of the battery test display on the Battery Test page. If the battery is calibrated, the Battery Test reports PASSED .If the battery status is “Calibrate”, run the battery test again. If the battery does not calibrate a second time it might need to be replaced. Purchase a new battery by contacting www.aussiebatt.com.
1 thought on “Manually calibrating Toshiba pa3534u-1bas laptop battery steps”